| Directional pattern |
Supercardioid |
| Principle of operation |
Pressure gradient |
| Cartridge type |
Pre-polarized condenser |
| Effective frequency response |
20 Hz - 20 kHz |
| Frequency range, ±2 dB, at 12 cm (4.7 in) |
100 Hz - 16 kHz. Permanent 3rd order low-cut filter at 80 Hz |
| Sensitivity, nominal, ±3 dB at 1 kHz |
5 mV/Pa; -46 dB re. 1 V/Pa |
| Equivalent noise level, A-weighted |
Typ. 22 dB(A) re. 20 µPa (max. 23 dB(A)) |
| Total harmonic distortion (THD) |
< 1% up to 139 dB SPL peak |
| Dynamic range |
Typ. 117 dB |
| Max. SPL, peak before clipping |
160 dB |
| Output impedance |
150 Ω |
| Minimum load impedance |
1 kΩ |
| Cable drive capability |
100 m (328 ft) |
| Output balance principle |
Impedance balancing with Active Drive |
| Common mode rejection ratio (CMRR) |
> 50 dB at 1 kHz |
| Power supply (for full performance) |
48 V Phantom power (±4 V) |
| Current consumption |
Max 2.5 mA |
| Connector |
XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase |
| Weight |
286 g |
| Size |
48mm x 19mm x 188mm |
| Maximum output voltage, RMS |
9 Vrms; 19 dBV; 28 dBu |
| Polarity |
+V at pin 2 for positive sound pressure |